βοΈ Interfacing the Nextion HMI Display with ATmega328 Using Bare-Metal C
A clean and reliable approach to UART-based embedded HMI control
Building a responsive and user-friendly HMI for microcontroller-based systems is a key skill in embedded development. Recently, I completed a project where I successfully interfaced a Nextion HMI LCD display with the ATmega328P microcontroller β entirely using bare-metal C, without any Arduino libraries.
This implementation focuses on direct register-level programming, ensuring full control over UART communication and hardware behavior.
π§ Project Overview
To test real-time control via an HMI, I created a simple UI in the Nextion Editor featuring two touch buttons:
- π Motor ON
- π Motor OFF
When a button is touched, the Nextion module transmits a specific serial command to the ATmega328. The microcontroller decodes this UART message, updates a text field on the HMI, and toggles a motor output connected to PB5.
β What This Project Demonstrates
This project helped validate several important embedded concepts:
πΉ Reliable UART Communication
The ATmega328P receives touch event data through UART at 9600 baud, confirming stable serial communication with the HMI.
πΉ Accurate Command Parsing
Each touch event sends a unique command. The firmware decodes these messages and triggers the appropriate action.
πΉ Real-Time Hardware Control
The motor output is updated instantly based on the userβs touch input, proving that the HMI can serve as a responsive control interface.
π οΈ Technical Specifications
- Microcontroller: ATmega328P
- Programming Method: Bare-metal C (register-level programming)
- Interface: UART @ 9600 baud
- HMI Module: 2.4β Nextion Display
- Features Implemented:
- Touch-triggered motor control
- Serial command decoding
- On-screen text updates
π Why This Matters
Interfacing a Nextion display without Arduino libraries provides:
- A deeper understanding of UART communication
- Full control over performance, memory usage, and interrupts
- A scalable foundation for building advanced, professional embedded HMI systems
Even with just two buttons, this project demonstrates the power of combining graphical interfaces with low-level microcontroller control.
Small interface, big satisfaction β the MCU listens when you touch the screen! π
Here Iβm sharing the Nextion HMI file, TFT file, and AVR project files for this project.
You can check them out here π GitHub Repository: https://github.com/gsmanees/Embedded_Systems/tree/main/AVR/more/Touch_MotorControl
From touch to hardware action, this setup demonstrates the power of efficient UART-based embedded design.